Awlgrip Polyester Urethane Topcoat
Product Overview
The legendary Awlgrip Polyester Urethane Topcoat is a two-component finish recognized worldwide as the ultimate standard in marine coatings. Known simply as "Awlgrip", this paint provides a finish that is tougher and more chemical resistant than acrylic urethane based paints. It requires less maintenance and has an incredible DOI (Distinction of Image).
Key Benefits
- Hardness & Durability: The linear polyester urethane resin creates a tightly cross-linked film resistant to staining, abrasion, and chemicals.
- Gloss Retention: Maintains a high-gloss wet look for years with minimal maintenance (no waxing required).
- Color Stability: Available in a vast range of custom colors that resist fading.
Application Guide
Must be applied over 545 Epoxy Primer. Spray application is recommended for optimal results. Mix Base and Converter (G3010) 1:1. Add Reducer (T0001/T0002/T0003) up to 25% to achieve spray viscosity. Apply a tack coat followed by full wet coats. Warning: Cannot be buffed or polished; runs must be sanded out and repainted.
Technical Data
- Mixing Ratio: 1:1:1 (Base : Converter G3010 : Reducer).
- Converter: G3010 (Spray), H3002 (Brush/Roller).
- Cure Time: Tape free 12-24 hours. Full cure 14 days.